When I think of patterns, I think of sewing right off the bat. Some could think of a pattern of conduct or behavior, I think of it as something that repeats on wallpaper or on a piece of patterned cloth that you would cut out a pattern from.
A while back I worked for a major decorating company for a number of years. The majority of the time I worked as a vendor representative with many companies from drapery and curtains to wallpaper and rugs and everything in between. It was a very fulfilling and creative time in my life. Unfortunately I chose to leave it for more money somewhere else. A place where there were no patterns except for those evading their taxes. There was a similar pattern in that respect.
Please see the short video I prepared to walk you through the way I created a flat panel from cotton muslin to hang on a cafe curtain in my tiny bathroom which previously had 2″ window blinds that stuck out when you opened them. I wanted to try something different so instead of just painting everything freehand on my panel, I found some colorful fish in my PhotoDraw clip gallery that I printed separately onto vellum/frosted paper. It’s a nice texture to print from. You can get them in the printer paper area or cheaper in scrap booking or paper craft area of any hobby or office store.
I placed pins to mask the general area for the fish patterns to go and used my inkjet printer to print directly on the sheets. You may have to place masking tape along the feed edge so the printer can see it. My printer is fussy with certain papers. You can see it on the transfer paper when I lay it inkside down on the fabric after I coat the area with gloss, semi-gloss or matte medium, liquid or gel. I have used them all with similar results. Don’t over saturate, but use enough. Experiment on scrap fabric before you ever start an actual project you care about to see the various effects you get from each type of transfer medium and what you prefer.
After I place the transfer ink side down on the medium I burnish the back of the entire picture with a plastic utensil I have. Many use a bone folder you can get at crafting stores. Don’t press too hard, but hard enough to push all the ink into the fabric from the paper. I use vellum because it does not come apart from the medium like other papers can do. It’s almost plastic like in texture. You will see that if you have used too much medium, the colors will squish out all over and the picture will blur and not look as good. Again, experiment for a while first.
Once I think that the transfer has been complete, I carefully lift up the paper and let it dry for at least a day. I don’t rush my drying when I need it completely dry. After that I hand painted various corals, plants and sea horses. I would have used a transfer for the seahorses as well but they were an after thought so I didn’t bother because I had already started some painting with acrylics. If you need to thin the paint you can use water or more medium depending on the thickness and intensity of color you wish to have.
Naturally I measured the panel and had all the edges finishes and sewed my rod pocket at the top to allow for the cafe rod, which is very small. Please see some of the finished pictures as well for an idea of how this looked from the outside of the window at night.